Fire Inspector

Chapter 9

Knowledge Check

1. Which of the following activities is considered open burning under most model fire codes?
2. The structural framework onto which pallets or other materials are placed describes which type of storage method?
3. Dispensing equipment for handling flammable or combustible liquids must be kept in:
4. An open flame is an example of which of the following unsafe behaviors?
5. According to NFPA® National Electric Code, Class I locations contain:
6. Which of the following is something an inspector should pay special attention when inspecting storage facilities?
7. According to NFPA® National Electric Code, Class III locations contain:
8. Who should inspectors notify if they encounter an unsafe situation created by the improper use of electrical equipment?
9. Equipment used in areas where explosive concentrations of __________ may exist must be equipped with special wiring and other electrical equipment for safety purposes.
10. Obstructions that prevent a safe and orderly exit are an example of which type of unsafe behavior?
11. Who is responsible for tracking changes to an electrical system?
12. What should inspectors review before conducting an inspection at a storage facility or retail outlet?
13. What can an inspector do about an observed unsafe behavior?
14. When it comes to open burning, what do most model fire codes require for individuals?
15. Of the primary storage methods, which common storage method represents the most challenging fire protection problem?
16. Which of the following is an unsafe behavior related to unintentional ignition sources?
17. Which of the following is MOST likely to lead to the issue of defective or improper electrical installations?
18. When a more challenging commodity is introduced or the height of storage is increased, the ________ evaluated to confirm the protection is adequate.
19. Which of the following is a common cause of electrical hazard fires?
20. During a fire, an inspector is responsible for accurately identifying and describing conditions within storage facilities and big-box stores to:
21. According to NFPA® National Electric Code, Class II locations contain:
22. Which of the following is a recommendation for exposure protection?
23. When there is a pattern of higher activity in a warehouse when it approaches capacity or when higher-risk materials are stored, the inspector should:
24. Which of the following is MOST accurate about pallet storage hazards?
25. Which commodity must be considered high-piled combustible storage if stored above a specific height above the fmished floor?
26. Who is usually responsible for the design, installation, and maintenance of fire protection systems in retail outlets?
27. Which of the following statements about arcing is MOST accurate?
28. Fire has the least chance to develop in which kind of common storage method?
29. Which of the following is an example of improper use and storage of flammable and combustible liquids?
30. Who can provide information to occupants about unsafe behaviors during facility surveys and preincident inspections?